4 in 1 bucket loader-manufacture,factory,supplier from China

Technical parameters:- Weight of the whole machine: about 2 tons- Power system: diesel engine, power 12-15 kilo watts- Maximum digging depth: 2.5-3 meters- Maximum digging radius: 3.5-4 meters- Maximum digging height: 3.2-3.5 meters- Travel speed: 1.5-2.5 kilometers/hour- Climbing capacity: 30°.- Bucket capacity: 0.05-0.10 cubic meters- Hydraulic system pressure: 16-20Mpa- Fuel tank capacity: 30-50 liters- Track width: 200-250mmApplicable scenes:- Municipal engineering: sewer trench excavation, road repair and other operations.- Landscaping: tree transplanting, flower bed leveling, soil excava

The working principle of remote control mower mainly includes the following key technologies and components: Navigation system:GPS positioning: Used to determine the precise position of the mower on the lawn.Lidar or camera: Used to scan and detect obstacles and boundaries around the lawn in real time.Infrared sensors: Assist in collision detection and avoidance, especially in low light or complex environments.Control system: Remote control or mobile application: provides a remote interface between the user and the mower, allowing the operator to adjust the mower's movement, spee

The working principle of remote control mower mainly includes the following key technologies and components: Navigation system: GPS positioning: Used to determine the precise position of the mower on the lawn.Lidar or camera: Used to scan and detect obstacles and boundaries around the lawn in real time.Infrared sensors: Assist in collision detection and avoidance, especially in low light or complex environments.Control system: Remote control or mobile application: provides a remote interface between the user and the mower, allowing the operator to adjust the mower's movement

1. Ensure smooth discharge of hot air(1) Do not open the radiator compartment partition or period as the heat transfer process of the vortex assembly at random. It is not always easy to do so because of the influence of high temperature air removal.(2) A number of exhaust ports in each cabin are well known, so insist that the protections and exhaust port pumps at the bottom of the engine will prevent objects from appearing and placing or blocking exhaust heat. Is. Reducing the intake star will increase the enginetemperatures in the cabin and increase intake air temperatures.

Small excavators are mainly used in agriculture, road construction, urban construction and other industries, the specific uses are as follows: 1, agricultural industry: small mining function efficient to help farmers crop planting, farmland land leveling; Digging trenches and fertilizing orchards; Deep digging of greenhouses and drainage ditches; The renovation of dry latrines, the construction of houses, the digging of foundations and even the use of small excavators for livestock farms to help them raise pigs and become rich. 2, road construction industry: In addition to the popula

Small mini excavator bypass valve failure today to analyze the small excavator central bypass valve failure.1. Boom lift, bucket low-speed digging and unloading, the central bypass valve is stuck in the open position, the oil output of the main pump to return to the hydraulic oil tank, the boom rise and bucket work circuit is not accessible, remove the central bypass line shaft for cleaning.2.

A new or overhauled excavator must undergo a period of trial operation, often referred to as the break-in period. The purpose of this period is to prevent early wear and tear of the excavator and to prolong its service life.

The chemical energy of the diesel oil is converted into mechanical energy by the diesel engine, the mechanical energy is converted into hydraulic energy by the hydraulic plunger pump, and the hydraulic energy is distributed to each actuator (hydraulic cylinder, rotary motor + reducer, walking motor + reducer) through the hydraulic system, and then the hydraulic energy is converted into mechanical energy by each actuator. Realize the movement of the working device, the rotation of the rotating platform and the walking movement of the whole machine.1.

The working principle of excavators can be divided into two aspects, namely mechanical drive and hydraulic control. Mechanical drive is driven by the engine to drive the transmission chain, drive the mechanical arm, bucket rod and bucket to complete the excavation and loading operations; Hydraulic control is to drive the oil circuit through the hydraulic pump to control the movement mode and action of the mechanical arm and bucket, making the operation of the excavator more accurate and efficient. In terms of mechanical drive, the core component of excavator work is hydraulic engine.

With the increasing demand for construction machinery and equipment, there are more and more types of excavators, and the market volume is also increasing year by year. According to the operation characteristics of excavators, Dezhong machinery classifies excavators, and briefly introduces their respective characteristics.Excavator Category 1 According to the different size, excavators can be divided into large excavators, medium-sized excavators and small excavators.